This marble was set incorrectly, and lipage was poorly cut. (see next pic)

This is the same floor.   We brought it back despite the abundance of large veining

This countertop was incorrectly set on the front rails.   It had to be removed and reset

After setting the rail, we polished out the seams

Honing of limestone

This extensive countertop that had to be honed to remove the etches on the limestone

Floor with lots of lipage

This is the floor shown in the previous photo after it had been ground flat, and set, to ensure proper water drainage

Removing wax and polish from a dirty floor

Once removal was complete, we honed and light polished the floor.   This finish will last 3-5 years, and eliminates any future need to strip wax

This was a deep crack

We first stabilized the slab.   The crack was then filled