MB-11 Touch Up Etch Remover


Polishing powder & etch remover for calcite based stones.

MB-11 Touch Up is a unique combination of specialty abrasives and catalysts that make the art of marble polishing relatively easy to implement without the need of any power tool. MB-11 Touch Up is designed for spot polishing of most “water stains” or “rings” from polished marble, travertine, and any other calcite-based stone. Works best on lighter stones.

All powders are packed by weight and not by volume.

 Directions for use: Be certain to test product first on a spare tile or inconspicuous area for extra caution before use. Use rubber gloves at all times when handling the product. Apply approximately 1/8 teaspoon of powder to the dull spot to be restored. Using a spray bottle, spray a mist of water over the powder, making sure all the powder is moistened. If you do not have a spray bottle, you can pour a few drops of water onto the powder from a cup. The mixture should be a wet paste consistency. Using a clean, slightly moistened white piece of cotton cloth (a washcloth will do fine), rub until the area treated is dry. To finish with a “professional touch”, spray a bit more water to the area being treated, then using the same part of the cloth with product residue, rub in circles (with a little pressure). Then use a fast back and forth motion (with more pressure) until the stone surface is dry and shiny. This will make for a perfect blend. Repeat the process if needed. For the final cleaning, to eliminate any residue, spray a little MB-5 Stone & More Multi Surface Spray Cleaner, then rub it dry.

SDS Available Here

Sign Up Here for our Informative Monthly Newsletter

You have Successfully Subscribed!